Weidmuller DPARTD - Universal glavanically isolated signal co Bedienungsanleitung PDF herunterladen (Seite 22)

• Modiﬁcations

Removing the left hand side plate

1. Remove the six self tapping

screws marked A-F (turn power

off first).

2. R

emove the two countersunk

bolts marked G & H.

Remove the left hand side plate

and note the position of the

insulator covering the power

supply board.

You can now ease the power supply board from the housing.

Warning: take great care when operating AC powered instruments

without the housing as there are high voltages present.

Note: bolt the power supply board and insulator to the side plate

before reassembly.

moving the electronics from the housing

1. Remove the left hand side plate as described above.

2. R

emove the six self tapping screws from the right hand side plate

(equivalents of A thru F on the left side).

3. R

emove the front cover.

4. Slide the base extrusion off the terminal board.

5. Re

move the two bolts from the right hand side plate

(equivalent of G & H on the left side). Note the position of the insulator.

Assembly is the reverse of the disassembly procedure.

Warning: Correct insulator location is essential to product safety.

LEFT HAND SIDE V EW

1 2 ... 17 18 19 20 21 22 23 24

Keine Kommentare

Weidmuller DPARTD - Universal glavanically isolated signal co Bedienungsanleitung Seite 22