Weidmuller CLCAR - Universal galvanically isolated signal con Bedienungsanleitung PDF herunterladen (Seite 19)

Connections

For effective protection from electromagnetic noise, all signal cables

must be shielded, or located on conductive trays or in conduits.

trip wires to 7 mm from the ends. Use a suitable ferrule for multi-

stranded wires (do not solder). Use 12-28 AWG Cu Wire rated for

emperatures above 70 °C Only, tighten to 4.5 lb-In.

Terminal Signal

1 24 V DC (out)

Input signals

2 Current +

3 Common −

4 Voltage +

Not used

Link to change the set-up Security Link

9 Neutral −

Power supply

10 Live +

11 Channel one

Alarm outputs12 Channel two

13 Common

14 Output +

Analogue outputs15 Current −

16 Voltage −

Case Earthing is via a stud on lower side of case

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 27 28

Keine Kommentare

Weidmuller CLCAR - Universal galvanically isolated signal con Bedienungsanleitung Seite 19