Weidmuller WI-MOD-E-G Bedienungsanleitung PDF herunterladen (Seite 26)

Accessories

2.4 GHz ANTENNAS (continued)

18dB Element Yagi Antenna WI-ANT-YGI-18

The 18 element Yagi antenna is designed for pole mount and to be clear from obstructions.

Black Radome is provided to improve the antennas resistance to ice build up.The nar-

row beam width and high front to back ratio is and extending radio range. A standard

female N-Type connection from a 150mm tail provides a simple connection method

when using the WI-CCSMA-N-33. Mounting brackets are supplied with this antenna.

Type Part No.

WI-ANT-YGI-18 6720005093

COAXIAL CABLE KITS AND ACCESSORIES

Coaxial Lead WI-CCTAIL-SMA-24

The WI-CCTAIL-SMA-24 is a 600mm (24 inch) RG58 coaxial lead. This flexible coaxial

“tail” is used inside enclosures to link large diameter coaxial cables (such as RG213 or

LDF4) to the wireless units.

The WI-CCTAIL-SMA-24 is terminated with a flanged N-Type (female) bulkhead con-

nector at one end and an SMA connector at the other end.

Type Loss @ 900MHz Loss @ 2.4 GHz Part No.

WI-CCTAIL-SMA-24 0.8dB 1.2dB 6720005103

Coaxial Cable Kits WI-CCSMA-N-10, WI-CCSMA-N-33, WI-CCSMA-N-66

The WI-CCSMA-N-10, WI-CCSMA-N-33 and WI-CCSMA-N-66 coaxial cable kits are

designed for use between wireless units and external mounted antennas. The coaxial

cable is terminated and tested alleviating time-consuming field termination work.

The WI-CCSMA-N-10 is 3.05 meters (10 feet) long, WI-CCSMA-N-33 is 10 meters

(33 feet) long and the WI-CCSMA-N-66 is 20 meters (66 feet) long.

The kits are terminated with a N-type male connector at the antenna end of the cable.

For the wireless end, kits are available with either SMA or BNC connectors to suit

different products.

Type Loss @ 900MHz Loss @ 2.4 GHz Part No.

WI-CCSMA-N-10 1.0dB 2.0dB 6720005100

WI-CCSMA-N-33 3.2dB 5.9dB 6720005101

WI-CCSMA-N-66 6.2dB 11.4dB 6720005102

Low Loss Coaxial Cables

For cables longer than a WI-CCSMA-N-66 kit (or WI-CCSMA-N-33 for 2.4GHz), low loss

coaxial cables such as LDF4 should be used. Low loss cables have large diameters with

large bending radii and are not suitable for direct connection to wireless modules.

Experience is required to terminate this type of cable and the coaxial manufacturer is

able to assist. Consider using Andrew LDF4-250 1/2 inch - www.andrew.com

Connecting Cables for “L” Series

The WI-CSER-RJ45 cable is used to connect and perform diagnostic and configuration

with the unidirectional Transmitter/Receiver units including the WI-I/O-L-T and WI-I/O-L-R.

This high quality cable is fitted with a molded DB9 on one end and an RJ45 connector

on the other.

Type Part No.

WI-CSER-RJ45 6720005108

Serial to Serial Connectivity Cables

The WI-CSER-905-9 Serial cable is used for all Weidmuller telemetry products, allowing

connection to your computer or laptop’s RS232 port, for diagnostic and configuration.

This high quality cable is fitted with a molded DB9 male and DB9 female connector.

The cable connection is “straight-through”.

Type Part No.

WI-CSER-905-9 6720005105

WI-ANT-YGI-18

18 Element Yagi Antenna

WI-CCSMA-N-10, WI-CCSMA-N-33,

WI-CCSMA-N-66

Coaxial Cable Kits

WI-CSER-RJ45

Connecting Cables for “L” Series

WI-CSER-905-9

Serial to Serial Connectivity Cables

WI-CCTAIL-SMA-24

Coaxial Lead

1 2 ... 21 22 23 24 25 26 27 28

Kommentare zu diesen Handbüchern

Keine Kommentare

Weidmuller WI-MOD-E-G Bedienungsanleitung Seite 26

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Vernetzung Weidmuller WI-MOD-E-G